Marble Tile Cleaning Archives - Hertfordshire Tile Doctor

Marble Tile Cleaning

Welcome to my Work History archive where you will find detailed examples of the cleaning and renovation of Marble tiles carried out in Hertfordshire

Marble is reputed in the international market for its premium quality, toughness and durability. It is often the preferred choice for interior and exterior in both commercial and domestic situations for flooring, wall cladding, paving, facades of buildings, pavements and landscaping.

One of the main issues with polished Marble is the polish starts to wear down with use and eventually becomes dull. Another issue we see is acid etching where strong unsuitable cleaning products used on the stone etch the surface and ruin its appearance. To resolve both these problems the stone needs to be re-polished with diamond encrusted burnishing pads of different grits to hone the stone and bring back that deep shine. If this sounds familiar you should talk to us about our annual maintenance program where we visit you once a year to clean, polish and seal your floor thus keeping it in top condition.

Below you will find detailed examples of work we have carried out in the past, it should give you some idea of what’s involved and what can be achieved with the right techniques and products.

Removing Limescale from Polished Black Marble floor tiles in a Baldock Bathroom

This customer in Baldock, North Hertfordshire has a beautiful Black Marble bathroom floor which unfortunately was far from looking its best due to a build-up Limescale. Normally this can be removed with an acidic cleaning product however Marble like all natural stones is acid sensitive would be damaged in the process.

Black Polished Marble Bathroom Floor in Baldock Before Limescale Removal

The only way to remove the Limescale would be to polish it off using a set of diamond pads which would also restore a high shine finish to the Marble floor tiles.

Removing Limescale from Polished Black Marble

The first step before starting the process was to cover the threshold edges, skirting’s and doors with tape to protect it from splashing etc. Next we used a medium dilution of Tile Doctor Pro Clean which is an alkaline tile and grout cleaner with hand brushes to clean-up the thin gout lines and remove any grit from the floor.

The floor was then rinsed with fresh water to remove the now soiled cleaning product and also steam cleaned to neutralise floor. The water was extracted from the floor using a wet vacuum.

Honing Black Marble to Restore Polish

To bring back the natural shine we honed the floor using a series of diamond-encrusted burnishing pads. Firstly, I applied a Coarse 400 grit pad to strip away what remained of the old sealer and Limescale, rinsing the floor afterwards. I then applied the Medium 800 grit and Fine 1500 grit pad to gradually close the pores of the stone which, in turn, restores the polished effect. Again each pad is used in combination with a small amount of water and any excess moisture is removed with a wet vacuum. The final 3,000 grit pad brings up a really deep shine and is applied with small amounts of water sprayed onto the tile.

Sealing Polished Black Marble Tiles

After drying the floor the Marble tiles were sealed with two coats of Tile Doctor Ultra-Seal which is a natural look sealer that doesn’t alter the appearance of the stone and protects it from staining by occupying the pores in the stone.

The last step was to buff the Marble tiles with a white buffing pad.