The photographs below are of a very old Quarry Tiled hallway floor taken at a beautiful 18th century farmhouse near Hemel Hempstead; the floor was believed to be original and the customer wanted it repaired and restored.
Deep Cleaning 18th Century Quarry Tiles
Before starting the cleaning process we made sure to protect any vulnerable areas such as the oak panelling on the staircase and then set about repairing the broken tiles which were replaced with matching reclaimed quarry tiles.
The resulting soiled solution was rinsed off with water and extracted using a wet vacuum which allowed us to see the underlying condition of the tiles which indicated more work was required especially to the grout. To get the grout looking cleaner it was treated with a strong dilution of Tile Doctor Pro-Clean which was then scrubbed into the grout manually using a stiff grout brush; the soiled cleaning solution was then rinsed off and extracted using a wet vacuum and then the whole floor was given a further rinse and also a steam clean to remove any trace of product.
Sealing 18th Century Quarry Tiles
It’s essential that tiles are bone dry before sealing so we left the floor to dry for a full seven days before returning. To get the best out of the floor I decided to seal the floor with two different but compatible sealers; first a single coat of Tile Doctor Colour Grow was applied which is an impregnating sealer that restores colour to the tile and protects it from stains by occupying the pores in the clay.
Once the Colour Grow had dried it was followed with six coats of Tile Doctor Seal and Go Extra which is a special acrylic based formula that promotes moisture vapour transmission which is essential for these old floors where no damp proof course was installed.